503-343-9899 orders@engitype.com

Figure 4

 Figure 4 Standalone is an affordable and versatile solution
for low volume production, and same-day prototyping.

3DSystems figure 4

Figure 4 Standalone SLA 3D Printer

FAST TURNAROUND
Achieve same-day functional prototyping and low volume production for ultra-high speeds up to 100 mm/hour.
EASE OF USE
Figure 4 Standalone was designed for ease-of-use, and includes file preparation and print management.
CONSISTENT, HIGH QUALITY OUTPUT
Powered by non-contact membrane Figure 4 technology, Figure 4 Standalone offers quality and accuracy at six sigma repeatability, with exceptional surface finish and fine feature detail. 
WIDE RANGE OF APPLICATIONS
With Figure 4 Standalone versatility, you can use the same printer for rapid iteration, functional prototyping, design verification, and end-use parts.

Figure 4 Standalone Technical Specifications

Net Build Volume (xyz)

  • 124.8 x 70.2 x 196 mm (4.9 x 2.8 x 7.7 in)

Resolution

  • 1920 x 1080 pixels

  • 65 microns (0.0025 in) (390.8 effective PPI)

Build Rate

  • up to 100 mm/hour build speed

Printer Dimensions

  • 42.6 x 48.9 x 97.1 cm (16.7 x 19.25 x 38.22 in)

     

    Materials

    • Figure 4 MED-AMB 10
    • Figure 4 MED-WHT 10
    • Figure 4 TOUGH-BLK 20
    • Figure 4 PRO-BLK 10
    • Figure 4 EGGSHELL-AMB 10
    • Figure 4 HI TEMP 300-AMB
    • Figure 4 FLEX-BLK 20
    • Figure 4 RUBBER-BLK 10
    • Figure 4 FLEX-BLK 10
    • Figure 4 JCAST-GRN 10
    • Figure 4 ELAST-BLK 10
    • Figure 4 TOUGH-GRY 15
    • Figure 4 TOUGH-GRY 10

    STRONG, DURABLE MATERIAL

    3D Systems’ Material Design Center has over 30 years of proven R&D experience and process development expertise. The broad and expanding range of materials available for the Figure 4 Standalone addresses a wide variety of applications needs, for functional prototyping, direct production of end-use parts, molding and casting, and includes ABS-like, polypropylene-like, rubber-like, castable, heat resistant and biocompatible capable materials.

    VERSATILITY

    Quick and easy material changeover allows for functional prototyping and production applications diversity with the same printer. Featuring a manual material feed, it is augmented with separate post-processing units available for cleaning, drying and curing.

    AFFORDABILITY

    With a compact and easy-to-use design, Figure 4 Standalone delivers industrial-grade durability at an affordable price and low total cost of operations.

    FAST TURN AROUND

    Achieve same-day functional prototyping and low volume production with ultra-high speeds. Figure 4 Standalone offers quality, accuracy and Six Sigma repeatability with industrial-grade durability, service and support. Figure 4 Standalone was designed for ease-of-use, and includes file preparation and print management with 3D Systems 3D Sprint Software.

    Buy from Engitype to make sure that your 3D Systems printer is up and running all day, every day.