503-343-9899 orders@engitype.com

Fuse Sift

Convenient, compact, all-in-one powder recovery station for the Fuse 1+ 30W.

Fuse Sift

The Fuse Sift is a safe, efficient powder recovery system for the Fuse 1+ 30W 3D printer. This easy-to-use, all-in-one station combines part extraction, powder recovery, storage, and mixing in a single free-standing device, for the most functionality in a single device available on the SLS market.  

  • Compact, enclosed system: A negative air pressure system keeps powder inside while enabling open access and easy cleanup. 
  • Low waste: A 30% material refresh rate means you can print with up to 70% recycled powder, indefinitely. Fuse Sift’s sieve filters out particles to be remixed with new powder and reused in future prints. 
  • Automatic powder mixing: Fuse Sift will dispense and mix used and new powder automatically so you can reduce waste and control your powder supply. 

    The Fuse 1 Ecosystem

    Technical Specifications


    101.5 × 61.0 × 154.5 cm
    39.9 × 24.0 × 60.8 in
    Height when open: 190 cm (75 in)

    Fresh Powder Hopper Capacity

    8.5 kg Nylon 12
    18.7 lb Nylon 12

    Used Powder Hopper Capacity
    9.1 kg Nylon 12
    20 lb Nylon 12
    Power Requirements
    Power Requirements (with a vacuum that draws more than 6 A (230 VAC) / 12 A (120 VAC))

    EU: 230 VAC, 10 A (dedicated circuit)
    US: 120 VAC, 20 A (dedicated circuit)


    Consumables Requirements

    Requires Special 300 Micron Sieve for Nylon 11 CF

    Ready to add a Formlabs 3D printer to your workflow?

    We’d love to see which printer would work the best for your business with you.